UT-118 Command

Command of UT-118(Under construction)

Command format is same as ID-1's control command. (See http://www.icom.co.jp/downloadfile/world/command_e_Rev_2_3.pdf )

Speed set for Slow Data port

for 9600bps
FE FE 01 7F 1D C9 00 FD
for 4800bps
FE FE 01 7F 1D C9 01 FD

When you isse this command, you can get the following data stream.

<CR><LF><CR><LF><CR><LF>Ver 03.30C<CR><LF>Ready! <CR><LF><11>

<xx>is the function code or Hexdecimal. Last <11> means the flow control of Xon/Xoff.

DUP mode setting

for ON
FE FE 01 7F 1D CF 01 FD

for OFF
FE FE 01 7F 1D CF 00 FD

My Callsign Setting

FE FE 01 7F 1D 03 37 4D 33 54 4A 5A 20 41 20 20 FD
                  ======================= =====
                  Ex. 7M3TJZ A            add 2 spaces

RXCallsign read out

FE FE 01 7F 1D 04 FD

Response of this command

FE FE 7F 01 1D 05 4A 41 31 59 49 58 20 47 4A 41 31 59 49 57 20 41 43 51 43 51 43 51 20 20 FD
                  ======================= ======================= =======================
                  RPT2 (ex. JP1YIX G)     RPT1(ex. JP1YIW A)      YOUR(ex. CQCQCQ  )

TX Callsign setting

FE FE 01 7F 1D 05 4A 41 31 59 49 58 20 47 4A 41 31 59 49 57 20 41 43 51 43 51 43 51 20 20 FD
                  ======================= ======================= =======================
                  RPT2 (ex. JP1YIX G)     RPT1(ex. JP1YIW A)      YOUR(ex. CQCQCQ  )

Break setting

for ON
FE FE 01 7F 1D 10 01 FD

for OFF
FE FE 01 7F 1D 10 00 FD

My Callsign "/" setting

FE FE 01 7F 1D DC 41 42 43 44 FD
                  ===========
                  ex. ABCD

specify 4 charecters.

TX Message setting

FE FE 01 7F 1D D2 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 FD
                  ===========================================================
                  ex. ABCDEFGHIJKLMNOPQRT

specify 20 charecters.